Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

iSSi Cleat Set
$16.99
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered. • 4 degrees of float both inward and outward
iSSi Flash I
$51.99 $64.99 20% Off
The Flash I is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. - Double bushing spindle, 52.5mm - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included
iSSi Flash II
$67.99 - $90.00 $84.99 - $90.00 Up to 20% Off
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. - Bushing / Sealed bearing spindle, 52.5mm - Models with longer spindles available in BlackOut - SPD-compatible cleats and mounting hardware included
iSSi Flash III
$84.00 - $115.00 $105.00 - $120.00 Up to 20% Off
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. Three sealed cartridge bearings make the Flash III iSSi’s smoothest rolling, most durable, lightest clipless pedals with multiple spindle length options. - Spindle Type: Flip III: Triple Bearing - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included
iSSi Flip I
$47.99 - $59.99 $59.99 Up to 20% Off
There’s no need to choose between clipless performance and platform versatility with iSSi Flip pedals. Go clipless on the commute or sport a pair of clogs around campus. - Compatible with SPD pedals & cleats - Compatible with two-bolt style shoes - Clipless on one side, platform on the other
iSSi Flip II Pedals
$59.99 - $80.00 $74.99 - $80.00 Up to 20% Off
There’s no need to choose between clipless performance and platform versatility with iSSi's Flip II pedals. Go clipless on the commute or sport clogs on campus. - Flip II: 56.5mm spindle length - Wear 2-bolt style cycling shoes or casual flat shoes - Compatible with iSSi, Shimano SPD, and Wellgo 98A cleats - Chromoly spindle, ED-coated - Standard 15mm wrench flats as well as 8mm hex broach - Black chrome hardware - Adjustable spring tension - 4° cleat float - 14.6° angle of release - Bushing/sealed bearing combination for low-maintenance durability - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch
iSSi Keo Compatible Cleat
$25.00
The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. - Cleat Bolt Pattern: 3-Bolt - Cleat Compatibility: Pedal iSSi , Look KeO - Cleat bolts and washers included - 4mm hex wrench required to install
iSSi Road Carbon Pedals
$79.99 - $100.00 $99.99 - $100.00 Up to 20% Off
The iSSi Road Carbon Pedals provide large platforms for excellent power transfer and stability. Bushing and sealed cartridge bearings add durability, while the Chromoly spindles resist corrosion for long life. - Simple installation with a 8mm hex key - Stainless Steel cleat plate provides a solid pedal interface - Adjustable spring tension - 7° float, 3-bolt split-cleat included - Cleat Interface: Look KeO - Material: Carbon - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Single-Sided Clipless - Spindle Material: Chromoly steel - Weight: 266 grams
iSSi Thump (Molded Pins)
$32.00 - $40.00 $39.99 - $40.00 Up to 20% Off
The concave shape and tall pins of the Thump composite pedal provides a "just-right" amount of traction—enough for the rigors of riding off-road—but with nylon pins to keep calves laceration-free on more casual rides. Two different platform sizes accommodate feet from small to Sasquatch. - Tough nylon composite body - Chromoly spindles, sealed cartridge bearings, and nylon bushings - Body: 18.5mm thick with 2.5mm of concavity for great control and pedal feel - Platform size: 119 x 99mm
iSSi Thump (Molded Pins, Small)
$39.99 - $40.00
The concave shape and tall pins of the Thump composite pedal provides a "just-right" amount of traction—enough for the rigors of riding off-road—but with nylon pins to keep calves laceration-free on more casual rides. Two different platform sizes accommodate feet from small to Sasquatch. - Tough, nylon composite body - Chromoly spindles, sealed cartridge bearings and nylon bushings - Body: 18.5mm thick with 2.5mm of concavity for great control and pedal feel - Platform size: 113 x 95mm
iSSi Thump (Replaceable Pins, Small)
$49.99 - $50.00
Built to handle the rigors of riding off-road, the concave shape and tall pins of the Thump composite pedal provide the perfect balance of traction and comfort for a range of applications. The Thump RP version comes with replaceable steel pins that provide solid traction when the trail gets hairy. Two different platform diameters accommodate a range of shoes sizes for a more personalized fit. - Tough, nylon composite body - Chromoly spindles, sealed cartridge bearings, and nylon bushings - Body: 18.5mm thick with 2.5mm of concavity for great control and comfort - Pin height: 3mm out of the box. Remove the 2mm washer under the pin head to convert to 5mm pin height. - Platform size: 113 x 95mm
iSSi Trail I
$55.99 - $56.00 $69.99 - $70.00 20% Off
iSSi's Trail pedal provides a wider platform, solid pedal contact, and mechanism protection for the rigors of cross-country and all-mountain riding—the iSSi Trail pedal provides the rider with more control and more confidence when the terrain gets tough. - Chromoly spindle, ED-coated - 8mm hex broach - 52.5mm spindle length - SPD Compatible - Black chrome hardware - Adjustable spring tension - 4º cleat float - Compatible with two-bolt style shoes - Two-sided clipless pedal
iSSi Trail II Pedal
$83.99 - $110.00 $104.99 - $110.00 Up to 20% Off
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution.
iSSi Trail III Pedal
$99.99 - $130.00 $124.99 - $130.00 Up to 20% Off
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. With triple-sealed cartridge bearings and durable chromoly spindles, these pedals will spin smoothly for countless rides. Plus, four degrees of float helps your knees track naturally during every crank revolution.
Zipp Handlebar Gel Pad Set
$17.99
Zipp’s Handlebar Gel Pad Set is a fast, easy way to minimize the countless bumps and vibrations from riding on less-than-perfect roads. This pack of two precision-shaped silicone gel contours to the tops of drop-style handlebars. Without tape on the bar, roll back your brake hoods and place the specially designed gel strips on the top of the bar from where the brake is attached to the handlebar. Simply rewrap your bar tape over the gel and enjoy the smooth ride.
YBN Nickel Plated Chain
$49.99
This chain uses 2 surface treatments for a long lasting and smooth running chain. Compared with standard bicycle chains the lifespan is expected to be double your standard mileage. - DHA hardening for a service life up to 8000 km/4900 miles - Nickel plated for increased rust protection and durability - Ni-PFTE treated to reduce friction - Laser cutouts and hollow pins to reduce weight - Chamfered inner and outer plates to smooth out and reduce shifting effort - Includes one QRS reusable master link and one traditional chain pin - Links (links): 116 - Color: Silver - Width: 5.5 mm - Drivetrain Speeds: 11 - Chain Connection Type: Reusable Master Link - Weight: 217 g
YBN Ti-Nitride Chain
$69.99 - $79.99
This chain uses 3 surface treatments for a long lasting and smooth running chain. Compared with standard bicycle chains the lifespan is expected to be double your standard mileage. - DHA hardening for a service life up to 8000 km/4900 miles - Ni-PFTE treated to reduce friction - Ti-Nitride coating provides a durable and long lasting finish - Chamfered inner and outer plates to smooth out and reduce shifting effort - Includes one QRS reusable master link and one traditional chain pin - Laser cutouts and hollow pins to reduce weight - Links (links): 116 - Color: Black - Width: 5.9 mm - Drivetrain Speeds: 10 - Chain Connection Type: Reusable Master Link - Weight: 242 g
Xpedo Spry Pedals
$89.99
Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency. - Weight: 260g - Body: Magnesium - Spindle: CroMo - Bearings: 2 Cartridge - Bushings: 1 DU - Pins: 28 Straight Pins per pair - Size: 106x100x11 (mm)
Wolf Tooth Components 5-Spoke GXP Direct Mount Ring
$69.95 - $79.95
Wolf Tooth's SDM® chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. - There are 3 offsets: Standard: 47mm chainline, 6mm offset for cyclocross and road cranks Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost: 52mm chainline, 3mm offset BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset
Whisky Parts Co. No. 7 Alloy Seatpost
$65.00
The Whisky No.7 Seatposts are made from the highest quality materials to be durable, lightweight, and comfortable. Whether you’re remounting during the cross race, or abusing them on the trail, you can trust Whisky’s seatposts. Available in different diameters and offsets. - Convenient finger adjustment of saddle angle - Unidirectional carbon shaft, forged aluminum head - No rider weight limit - 5 year Whisky warranty - ASTM Condition 3 - For rough off-road riding and jumps less than 24"
Wheels Manufacturing Inc. 386EVO Angular Contact Bottom Bracket
$110.00
Threaded Angular Contact BB for 386EVO frames (86.5mm shell width, 46mm shell ID). Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: BB386EVO - Bottom Bracket Shell Width (mm): 86.5mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 124g - Packaged for retail display - Will accept 24mm and 24/22mm cranksets using Wheels Mfg. 386EVO BB / Crank Adapters
Wheels Manufacturing Inc. BB86/92 Thread Together Angular Contact Bottom Bracket
$110.00
Wheels Mfg BB86/92 thread together bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm, 92mm, 89.5mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 106g
Wheels Manufacturing Inc. Ball Bearing Retainer
$4.75 - $17.00
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
Wheels Manufacturing Inc. Derailleur Hanger 14
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws
Wheels Manufacturing Inc. Derailleur Hanger 142
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 148
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 19
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 215
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 248
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M4x8 Flat head screws included Note: This dropout can be used in place of Wheels Mfg DROPOUT-246. The only difference is the number of fasteners.
Wheels Manufacturing Inc. Derailleur Hanger 284
$32.00
Replacement derailleur hanger for Specialized Diverge, CruX and Roubaix Carbon with Specialized SCS 135x12 thru-axle system. All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 Socket head screw included
Page 1 of 92 Next page