- The original third-Eye eyeglass mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to left or right sun/Eyeglass temple-Arm - Rubber-Tipped outer prongs provide a no-Slip mount
- The original third-Eye bar-End mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to most handlebar bar-End with a rubber, Internal-Expanding plug system
A new bell built to Spurcycle standards using 30% fewer parts and a singletrack focus. Lighter and more compact, it's the perfect bell for your mountain bike or flat-bar commuter. Fits 22.2mm ONLY (3mm hex tool required.)
Spurcycle bells create powerful, enduring sound. Give notice well in advance with a loud, convincing tone. Precision built in the USA for a lifetime of way clearing.
Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear. - Weight: 26g (.9oz) - Dome Diameter: 34mm (1.34") - Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters
The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter
This is a big bell with a big ring. At 83mm across, this steel bell sends a loud, two-tone ring that is sure to catch the ear of anyone in your path. The handlebar mount on the bottom of the bell is adjustable to fit all common handlebars and holds tight for surefire ring-ability while you roll.
$14.99 - $19.99
Keep an eye on what's behind you with MSW's Selfie Mirrors. With options to mount on a handlebar, on your helmet, or into your bar end with a folding design, you're free to choose the rear view that speaks to you.
$12.00 - $14.99
A new angle on bells. Low and lean looking; very techy too. - Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters
$11.99 - $12.99
Little, Light, & Loud! Our Original Incredibell has been redesigned for quick and easy mounting on nearly any handlebar. The pivoting dinger can be rotated to any position.
Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!
$7.36 - $39.99
- 115 decibel horn with volume control switch - Mounts to most handlebars - Air reservoir is easily refilled with any bike pump - no batteries needed - Extension allows for more versatility when mounting
The sleek and ultralight BM-45 bar end mirror easily attaches to drop and flat bars, making it perfect for all bikes. Constructed of aluminum and glass for durability and nearly distortion-free viewing, the BM-45 represents the height of handlebar mirror construction and design. Minimal projection from the bar means never having to sacrifice clean aesthetics for critical rear-view safety again.
- Made in the USA - Enables Take a Look Original Eyeglass Mirror to fit helmets - Does not work with Take a Look Compact Eyeglass Mirror
$24.99 - $149.99
The Basil Portland Bell Brass makes an instant impression. The timeless silver finish ensures an easy complement to almost any bicycle frame, while the bell itself is easily mounted to your frame, with no complex installation to worry about. When rung, this bell emits an audible sound that’s loud enough to alert other cyclists, motorists and pedestrians of your presence.
- Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts on either side of helmet offering a wide range of adjustment - Mirror and/Or arm can be detached from helmet mount - Adhesive backed plastic fan-Plate fits most helmets
$24.99 - $34.99
Retro Mirror Sprintech Single Mirror. Works with all road handlebars by attaching to the bar end using its simple retrobike install. Allows you to see traffic from behind without having to look over your shoulder. Expands your visual field without shifting head or body to see behind you. As reliable as a car's rearview mirror! Placed on the left side of the handlebars, the Sprintech rearview mirror is easy to install. Simply remove the cap from the end of the handlebar, insert the connector plug, and attach the Sprintech rearview mirror. Once installed, simply adjust to the desired position. Available in five colors: Black, White, Red, Yellow, and Blue. Also available in pairs!
Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate. - ?Polished brass bell - Replaces a 10mm 1 1/8" headset spacer - Quick-reflex alloy clapper - Lifetime PDWarranty
Every commuter bike needs a good bell, and this is it: It's a Brass Bell. It's small, it's loud, it's not ostentatious, It's a Brass Bell. Greet your friends, alert pedestrians, put a ring on it! - Fits 22.2mm handlebars
Announce your presence with Portland Design Works' King Of Ding II Bell. This solid brass bell rings loud and clear. - Solid brass bell - Brass striker - Alloy mounting - Fits 22.2 - 25.4mm handlebars
Coming in hot! This limited edition King of Ding II is laser-engraved "COMING IN HOT." Perfect for speed demons, messengers, cat6 champions, and anyone else who "can't stop, don't want to." The bell is made of solid brass and comes equipped with a brass striker for a loud clear ring that's sure to clear the path. The alloy mount is easy to install and fits 22.2 – 25.4mm handlebars.
Add a little flair and extra visibility to your ride. A Saddle Charm adds character to the tail of your whip! Made of our woven handlebar tape, a sturdy thread locking loop, and highly reflective 3M trim, our Saddle Charms can be attached to the rails of your saddle, the bag loops on a Brooks England saddle, or just about anywhere on your bike or bag for a pop of added safety and fun. They may even give you a bit of extra luck.
Let other cyclists and pedestrians know you're there by ringing your Planet Bike Courtesy Bell. This minimal bell has a striker that rotates 360 degrees so you can place it wherever you need it for easy access. And it fits on handlebars with diameters from 22.3 to 26mm.
Let other cyclists and pedestrians know you're there by ringing your Planet Bike Courtesy Bell Classic. This bell has a striker that rotates 360 degrees so you can place it wherever you need it for easy access. And it fits on handlebars with diameters from 22.3 to 26mm.
The beauty of this little bell's unique design is that it securely attaches to your bike's cable housing so it doesn't require any real estate on your handlebars. Mount it within reach of your thumb or forefinger and ring out a crisp "ding, ding, ding" when you merrily pedal past on the left. - Clip mount quickly and securely attaches to cable housing - Diminutive size and clip mount free up handlebar space - Lightweight brass bell has a clean sound - 360-degree dinger rotation for perfect positioning - High fatigue spring
- Rin rin mini bells produce an extremely clear tone. Available in a wide variety of colors including white - Made in japan
- Designed with road drop bars in mind - Can mount on the brake hood, On cable housing, And on some flat bar levers (Levers need to have flat section less than 9mm deep) - Clamps on with a screw. Simply turn the bell dome to loosen and tighten - Reversible for right and left hand use - Does not use a spring loaded clip - Made in japan
Don't let the tiny size fool you. Mirrycle's Incredibell Bellini is little, light and gets noticed! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Weight: Black & Silver 17g, Brass 28g - Dome Diameter: 28mm (1.1") - Fits handlebars with 21mm – 22.6mm (.83" – .89") outside diameters
Made of solid brass, this bell’s melodic sound is full and old-fashioned. Big and brassy, the perfect accompaniment for cruisers, comfort, and town bikes. - Dome Diameter: 51mm (2") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
Page 1 of 3 Next page